ISO Normen: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
(→ISO-Normen Road Vehicles / Road vehicles engineering: 2. Teil motorcycles + bicycles) |
|||
Zeile 14: | Zeile 14: | ||
*[[ISO 1176|1176]] Road vehicles - Masses - Vocabulary and codes | *[[ISO 1176|1176]] Road vehicles - Masses - Vocabulary and codes | ||
*[[ISO 1185|1185]] Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage | *[[ISO 1185|1185]] Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage | ||
*[[ISO 1204|1204]] Reciprocating internal combustion engines - Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine | |||
*[[ISO 1585|1585]] Road vehicles - Engine test code - Net power | *[[ISO 1585|1585]] Road vehicles - Engine test code - Net power | ||
*[[ISO 1724|1724]] Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage | *[[ISO 1724|1724]] Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage | ||
Zeile 75: | Zeile 76: | ||
*[[ISO 4091|4091]] Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements | *[[ISO 4091|4091]] Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements | ||
*[[ISO 4100|4100]] Road vehicles - World parts manufacturer identifier (WPMI) code | *[[ISO 4100|4100]] Road vehicles - World parts manufacturer identifier (WPMI) code | ||
*[[ISO 4106|4106]] Motorcycles - Engine test code - Net power | |||
*[[ISO 4113|4113]] Road vehicles - Calibration fluids for diesel injection equipment | *[[ISO 4113|4113]] Road vehicles - Calibration fluids for diesel injection equipment | ||
*[[ISO 4129|4129]] Road vehicles - Mopeds - Symbols for controls, indicators and tell-tales | *[[ISO 4129|4129]] Road vehicles - Mopeds - Symbols for controls, indicators and tell-tales | ||
Zeile 84: | Zeile 86: | ||
*[[ISO 4151|4151]] Road vehicles - Mopeds - Type, location and functions of controls | *[[ISO 4151|4151]] Road vehicles - Mopeds - Type, location and functions of controls | ||
*[[ISO 4165|4165]] Road vehicles - Electrical connections - Double-pole connection | *[[ISO 4165|4165]] Road vehicles - Electrical connections - Double-pole connection | ||
*[[ISO 4210|4210]] Cycles - Safety requirements for bicycles | |||
*[[ISO 4254|4254]] Agricultural machinery - Safety | *[[ISO 4254|4254]] Agricultural machinery - Safety | ||
*[[ISO 4513|4513]] Road vehicles - Visibility - Method for establishment of eyellipses for driver's eye location | *[[ISO 4513|4513]] Road vehicles - Visibility - Method for establishment of eyellipses for driver's eye location | ||
Zeile 96: | Zeile 99: | ||
*[[ISO 5422|5422]] Road vehicles - Anchorages for towing ropes, cables or bars | *[[ISO 5422|5422]] Road vehicles - Anchorages for towing ropes, cables or bars | ||
*[[ISO 5740|5740]] Road vehicles - Rear view mirrors - Test method for determining reflectance | *[[ISO 5740|5740]] Road vehicles - Rear view mirrors - Test method for determining reflectance | ||
*[[ISO 5775|5775]] Bicycle tyres and rims | |||
*[[ISO 5898|5898]] Passenger cars - Rear-window defrosting system - Test method | *[[ISO 5898|5898]] Passenger cars - Rear-window defrosting system - Test method | ||
*[[ISO 6054|6054]] Motorcycle tyres and rims (Code-designated series) - Diameter codes 4 to 12 | |||
*[[ISO 6117|6117]] Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.) | *[[ISO 6117|6117]] Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.) | ||
*[[ISO 6118|6118]] Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.) | *[[ISO 6118|6118]] Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.) | ||
Zeile 120: | Zeile 125: | ||
*[[ISO 6626|6626]] Internal combustion engines - Piston rings | *[[ISO 6626|6626]] Internal combustion engines - Piston rings | ||
*[[ISO 6627|6627]] Internal combustion engines - Piston rings - Expander/segment oil-control rings | *[[ISO 6627|6627]] Internal combustion engines - Piston rings - Expander/segment oil-control rings | ||
*[[ISO 6692|6692]] Cycles - Marking of cycle components | |||
*[[ISO 6695|6695]] Cycles - Pedal axle and crank assembly with square end fitting - Assembly dimensions | |||
*[[ISO 6696|6696]] Cycles - Screw threads used in bottom bracket assemblies | |||
*[[ISO 6697|6697]] Cycles - Hubs and freewheels - Assembly dimensions | |||
*[[ISO 6698|6698]] Cycles - Screw threads used to assemble freewheels on bicycle hubs | |||
*[[ISO 6699|6699]] Cycles - Stem and handlebar bend - Assembly dimensions | |||
*[[ISO 6701|6701]] Cycles - External dimensions of spoke nipples | |||
*[[ISO 6722|6722]] Road vehicles - 60 V and 600 V single-core cables | *[[ISO 6722|6722]] Road vehicles - 60 V and 600 V single-core cables | ||
*[[ISO 6725|6725]] Road vehicles - Dimensions of two-wheeled mopeds and motorcycles - Terms and definitions | *[[ISO 6725|6725]] Road vehicles - Dimensions of two-wheeled mopeds and motorcycles - Terms and definitions | ||
*[[ISO 6726|6726]] Mopeds and motorcycles with two wheels - Masses - Vocabulary | *[[ISO 6726|6726]] Mopeds and motorcycles with two wheels - Masses - Vocabulary | ||
*[[ISO 6727|6727]] Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales | *[[ISO 6727|6727]] Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales | ||
*[[ISO 6742|6742]] Cycles - Lighting and retro-reflective devices - Photometric and physical requirements | |||
*[[ISO 6743|6743]] Lubricants, industrial oils and related products (class L) - Classification | |||
*[[ISO 6786|6786]] Road vehicles - Air braking systems - Identification of connections on units | *[[ISO 6786|6786]] Road vehicles - Air braking systems - Identification of connections on units | ||
*[[ISO 6797|6797]] Road vehicles - Motor vehicles - Production conformity requirements for flasher units | *[[ISO 6797|6797]] Road vehicles - Motor vehicles - Production conformity requirements for flasher units | ||
*[[ISO 6813|6813]] Road vehicles - Collision classification - Terminology | *[[ISO 6813|6813]] Road vehicles - Collision classification - Terminology | ||
*[[ISO 6826|6826]] Reciprocating internal combustion engines - Fire protection | *[[ISO 6826|6826]] Reciprocating internal combustion engines - Fire protection | ||
*[[ISO 6855|6855]] Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption | |||
*[[ISO 6856|6856]] Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements | *[[ISO 6856|6856]] Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements | ||
*[[ISO 6969|6969]] Road vehicles - Sound signalling devices - Tests after mounting on vehicle | *[[ISO 6969|6969]] Road vehicles - Sound signalling devices - Tests after mounting on vehicle | ||
*[[ISO 7030|7030]] Road vehicles - Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 | *[[ISO 7030|7030]] Road vehicles - Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 | ||
*[[ISO 7117|7117]] Motorcycles - Measurement method for determining maximum speed | |||
*[[ISO 7141|7141]] Road vehicles - Light alloy wheels - Impact test | *[[ISO 7141|7141]] Road vehicles - Light alloy wheels - Impact test | ||
*[[ISO 7308|7308]] Road vehicles - Petroleum-based brake-fluid for stored-energy hydraulic brakes | *[[ISO 7308|7308]] Road vehicles - Petroleum-based brake-fluid for stored-energy hydraulic brakes | ||
Zeile 136: | Zeile 152: | ||
*[[ISO 7375|7375]] Road vehicles - Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles | *[[ISO 7375|7375]] Road vehicles - Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles | ||
*[[ISO 7397|7397]] Passenger cars - Verification of driver's direct field of view | *[[ISO 7397|7397]] Passenger cars - Verification of driver's direct field of view | ||
*[[ISO 7398|7398]] Motorcycles - Direct current flasher units | |||
*[[ISO 7399|7399]] Motorcycles - Alternating current flasher units | |||
*[[ISO 7401|7401]] Road vehicles - Lateral transient response test methods - Open-loop test methods | *[[ISO 7401|7401]] Road vehicles - Lateral transient response test methods - Open-loop test methods | ||
*[[ISO 7440|7440]] Road vehicles - Fuel injection equipment testing | *[[ISO 7440|7440]] Road vehicles - Fuel injection equipment testing | ||
Zeile 169: | Zeile 187: | ||
*[[ISO 7975|7975]] Passenger cars - Braking in a turn - Open-loop test method | *[[ISO 7975|7975]] Passenger cars - Braking in a turn - Open-loop test method | ||
*[[ISO 8035|8035]] Commercial road vehicles and buses over 3,5 t - Front towing attachments | *[[ISO 8035|8035]] Commercial road vehicles and buses over 3,5 t - Front towing attachments | ||
*[[ISO 8090|8090]] Cycles - Terminology | |||
*[[ISO 8092|8092]] Road vehicles - Connections for on-board electrical wiring harnesses | *[[ISO 8092|8092]] Road vehicles - Connections for on-board electrical wiring harnesses | ||
*[[ISO 8093|8093]] Road vehicles - Diagnostic testing of electronic systems | *[[ISO 8093|8093]] Road vehicles - Diagnostic testing of electronic systems | ||
*[[ISO 8098|8098]] Cycles - Safety requirements for bicycles for young children | |||
*[[ISO 8123|8123]] Road vehicles - Diametral pitch starter motor pinions | *[[ISO 8123|8123]] Road vehicles - Diametral pitch starter motor pinions | ||
*[[ISO 8178|8178]] Reciprocating internal combustion engines - Exhaust emission measurement | *[[ISO 8178|8178]] Reciprocating internal combustion engines - Exhaust emission measurement | ||
*[[ISO 8349|8349]] Road vehicles - Measurement of road surface friction | *[[ISO 8349|8349]] Road vehicles - Measurement of road surface friction | ||
*[[ISO 8356|8356]] Road vehicles - Diesel engines - Screw-in injector, type 22 | *[[ISO 8356|8356]] Road vehicles - Diesel engines - Screw-in injector, type 22 | ||
*[[ISO 8488|8488]] Cycles - Screw threads used to assemble head fittings on bicycle forks | |||
*[[ISO 8562|8562]] Cycles - Stem wedge angle | |||
*[[ISO 8644|8644]] Motorcycles - Light-alloy wheels - Test method | *[[ISO 8644|8644]] Motorcycles - Light-alloy wheels - Test method | ||
*[[ISO 8710|8710]] Motorcycles - Brakes and brake systems - Tests and measurement methods | *[[ISO 8710|8710]] Motorcycles - Brakes and brake systems - Tests and measurement methods | ||
Zeile 189: | Zeile 211: | ||
*[[ISO 8855|8855]] Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary | *[[ISO 8855|8855]] Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary | ||
*[[ISO 8856|8856]] Road vehicles - Electrical performance of starter motors - Test methods and general requirements | *[[ISO 8856|8856]] Road vehicles - Electrical performance of starter motors - Test methods and general requirements | ||
*[[ISO 9021|9021]] Motorcycles - Controls - Types, positions and functions | |||
*[[ISO 9103|9103]] Road vehicles - Compression-ignition engines - Screw-in injection nozzle holder, type 23 | *[[ISO 9103|9103]] Road vehicles - Compression-ignition engines - Screw-in injection nozzle holder, type 23 | ||
*[[ISO 9128|9128]] Road vehicles - Graphical symbols to designate brake fluid types | *[[ISO 9128|9128]] Road vehicles - Graphical symbols to designate brake fluid types | ||
Zeile 194: | Zeile 217: | ||
*[[ISO 9130|9130]] Motorcycles - Measurement method for location of centre of gravity | *[[ISO 9130|9130]] Motorcycles - Measurement method for location of centre of gravity | ||
*[[ISO 9131|9131]] Three-wheeled mopeds and motorcycles - Dimensions - Vocabulary | *[[ISO 9131|9131]] Three-wheeled mopeds and motorcycles - Dimensions - Vocabulary | ||
*[[ISO 9132|9132]] Three-wheeled mopeds and motorcycles - Masses - Vocabulary | |||
*[[ISO 9141|9141]] Road vehicles - Diagnostic systems - Requirements for interchange of digital information | *[[ISO 9141|9141]] Road vehicles - Diagnostic systems - Requirements for interchange of digital information | ||
*[[ISO 9158|9158]] Road vehicles - Nozzle spouts for unleaded gasoline | *[[ISO 9158|9158]] Road vehicles - Nozzle spouts for unleaded gasoline | ||
Zeile 203: | Zeile 227: | ||
*[[ISO 9458|9458]] Passenger cars - Starter motor electrical connections | *[[ISO 9458|9458]] Passenger cars - Starter motor electrical connections | ||
*[[ISO 9534|9534]] Road vehicles - Fuel pump electric connections | *[[ISO 9534|9534]] Road vehicles - Fuel pump electric connections | ||
*[[ISO 9565|9565]] Two-wheeled motorcycles - Parking stability of side- and centre-stands | |||
*[[ISO 9619|9619]] Passenger cars - Windscreen wiping systems - Test method | *[[ISO 9619|9619]] Passenger cars - Windscreen wiping systems - Test method | ||
*[[ISO 9704|9704]] Passenger cars - Wiper systems - Shaft ends and arm-holes | *[[ISO 9704|9704]] Passenger cars - Wiper systems - Shaft ends and arm-holes | ||
Zeile 211: | Zeile 236: | ||
*[[ISO 9987|9987]] Motorcycles - Measurement of variation of dipped beam inclination as a function of load | *[[ISO 9987|9987]] Motorcycles - Measurement of variation of dipped beam inclination as a function of load | ||
*[[ISO 10191|10191]] Passenger car tyres - Verifying tyre capabilities - Laboratory test methods | *[[ISO 10191|10191]] Passenger car tyres - Verifying tyre capabilities - Laboratory test methods | ||
*[[ISO 10230|10230]] Cycles - Splined hub and sprocket - Mating dimensions | |||
*[[ISO 10231|10231]] Motorcycle tyres - Test methods for verifying tyre capabilities | |||
*[[ISO 10392|10392]] Road vehicles - Determination of centre of gravity | *[[ISO 10392|10392]] Road vehicles - Determination of centre of gravity | ||
*[[ISO 10455|10455]] Road vehicles - Dry ignition coils using rotating high-voltage distributor | *[[ISO 10455|10455]] Road vehicles - Dry ignition coils using rotating high-voltage distributor | ||
Zeile 229: | Zeile 256: | ||
*[[ISO 11155|11155]] Road vehicles - Air filters for passenger compartments | *[[ISO 11155|11155]] Road vehicles - Air filters for passenger compartments | ||
*[[ISO 11157|11157]] Road vehicles - Brake lining assemblies - Inertia dynamometer test method | *[[ISO 11157|11157]] Road vehicles - Brake lining assemblies - Inertia dynamometer test method | ||
*[[ISO 11243|11243]] Cycles - Luggage carriers for bicycles - Concepts, classification and testing | |||
*[[ISO 11270|11270]] Intelligent transport systems - Lane keeping assistance systems (LKAS) - Performance requirements and test procedures | *[[ISO 11270|11270]] Intelligent transport systems - Lane keeping assistance systems (LKAS) - Performance requirements and test procedures | ||
*[[ISO 11406|11406]] Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability | *[[ISO 11406|11406]] Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability | ||
Zeile 235: | Zeile 263: | ||
*[[ISO 11451|11451]] Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy | *[[ISO 11451|11451]] Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy | ||
*[[ISO 11452|11452]] Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy | *[[ISO 11452|11452]] Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy | ||
*[[ISO 11460|11460]] Two-wheeled motorcycles - Positioning of lighting and light-signalling devices | |||
*[[ISO 11486|11486]] Motorcycles - Methods for setting running resistance on a chassis dynamometer | *[[ISO 11486|11486]] Motorcycles - Methods for setting running resistance on a chassis dynamometer | ||
*[[ISO 11519|11519]] Road vehicles - Low-speed serial data communication | *[[ISO 11519|11519]] Road vehicles - Low-speed serial data communication | ||
Zeile 263: | Zeile 292: | ||
*[[ISO 13044|13044]] Road vehicles - 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations | *[[ISO 13044|13044]] Road vehicles - 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations | ||
*[[ISO 13052|13052]] Road vehicles - Trailers up to 3,5 t - Requirements for jockey wheels and drawbar supports | *[[ISO 13052|13052]] Road vehicles - Trailers up to 3,5 t - Requirements for jockey wheels and drawbar supports | ||
*[[ISO 13063|13063]] Electrically propelled mopeds and motorcycles - Safety specifications | |||
*[[ISO 13064|13064]] Battery-electric mopeds and motorcycles - Performance | |||
*[[ISO 13207|13207]] Road vehicles - LED lamp characteristics for bulb compatible failure detection | *[[ISO 13207|13207]] Road vehicles - LED lamp characteristics for bulb compatible failure detection | ||
*[[ISO 13209|13209]] Road vehicles - Open Test sequence eXchange format (OTX) | *[[ISO 13209|13209]] Road vehicles - Open Test sequence eXchange format (OTX) | ||
Zeile 276: | Zeile 307: | ||
*[[ISO 13556|13556]] Road vehicles - Localization of exhaust system leaks and equipment specifications | *[[ISO 13556|13556]] Road vehicles - Localization of exhaust system leaks and equipment specifications | ||
*[[ISO 13674|13674]] Road vehicles - Test method for the quantification of on-centre handling | *[[ISO 13674|13674]] Road vehicles - Test method for the quantification of on-centre handling | ||
*[[ISO 13738|13738]] Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) | |||
*[[ISO 13837|13837]] Road vehicles - Safety glazing materials - Method for the determination of solar transmittance | *[[ISO 13837|13837]] Road vehicles - Safety glazing materials - Method for the determination of solar transmittance | ||
*[[ISO 13988|13988]] Passenger vehicle wheels - Clip balance weight and rim flange nomenclature, test procedures and performance requirements | *[[ISO 13988|13988]] Passenger vehicle wheels - Clip balance weight and rim flange nomenclature, test procedures and performance requirements | ||
Zeile 336: | Zeile 368: | ||
*[[ISO 17386|17386]] Transport information and control systems - Manoeuvring Aids for Low Speed Operation (MALSO) - Performance requirements and test procedures | *[[ISO 17386|17386]] Transport information and control systems - Manoeuvring Aids for Low Speed Operation (MALSO) - Performance requirements and test procedures | ||
*[[ISO 17458|17458]] Road vehicles - FlexRay communications system | *[[ISO 17458|17458]] Road vehicles - FlexRay communications system | ||
*[[ISO 17479|17479]] Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance | |||
*[[ISO 17949|17949]] Impact test procedures for road vehicles - Seating and positioning procedures for anthropomorphic test devices - Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions | *[[ISO 17949|17949]] Impact test procedures for road vehicles - Seating and positioning procedures for anthropomorphic test devices - Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions | ||
*[[ISO 18164|18164]] Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance | *[[ISO 18164|18164]] Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance | ||
Zeile 369: | Zeile 402: | ||
*[[ISO 23671|23671]] Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres | *[[ISO 23671|23671]] Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres | ||
*[[ISO 23828|23828]] Fuel cell road vehicles - Energy consumption measurement - Vehicles fuelled with compressed hydrogen | *[[ISO 23828|23828]] Fuel cell road vehicles - Energy consumption measurement - Vehicles fuelled with compressed hydrogen | ||
*[[ISO 24254|24254]] Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB) | |||
*[[ISO 25981|25981]] Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage | *[[ISO 25981|25981]] Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage | ||
*[[ISO 26021|26021]] Road vehicles - End-of-life activation of on-board pyrotechnic devices | *[[ISO 26021|26021]] Road vehicles - End-of-life activation of on-board pyrotechnic devices |
Version vom 20. Februar 2015, 10:09 Uhr
Diese Seite listet die für Straßenfahrzeuge gebräuchlichen ISO-Normen auf. Sie sind entweder ICS 43 "Road vehicles engineering" oder ISO/TC 22/SC "Road Vehicles" zugeordnet.
- ICS - International Classification for Standards (Einordnung nach Gebieten)
- TC - Technical Committee (das für Straßenfahrzeuge zuständige Expertengremium (TC) hat die Nummer 22). Für Traktoren und Ackergeräte wäre TC 23 zuständig. Unter TC 22 fallen auch Fahrräder.
- SC - Subcommittee
Eine Suchfunktion findet sich hier. Die Normen gibt es nur in den 3 Sprachen englisch, französisch und russisch. Sofern die ISO-Norm auch in einer DIN-Norm Anwendung fand, findet sich eine deutsche Übersetzung hier. ISO-Normen werden standardmäßig alle 5 Jahre überprüft.
ISO-Normen Road Vehicles / Road vehicles engineering
- 337 Road vehicles - 50 semi-trailer fifth wheel coupling pin - Basic and mounting/interchangeability dimensions
- 362 Measurement of noise emitted by accelerating road vehicles
- 611 Road vehicles - Braking of automotive vehicles and their trailers
- 612 Road vehicles - Dimensions of motor vehicles and towed vehicles
- 1102 Commercial road vehicles - 50 mm drawbar eye - Interchangeability
- 1103 Road vehicles - Coupling balls for caravans and light trailers - Dimensions
- 1176 Road vehicles - Masses - Vocabulary and codes
- 1185 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
- 1204 Reciprocating internal combustion engines - Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
- 1585 Road vehicles - Engine test code - Net power
- 1724 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
- 1726 Road vehicles - Mechanical coupling between tractors and semi-trailers
- 1728 Road vehicles - Pneumatic braking connections between motor vehicles and towed vehicles - Interchangeability
- 1995 Aromatic hydrocarbons - Sampling
- 2416 Passenger cars - Mass distribution
- 2534 Road vehicles - Engine test code - Gross power
- 2575 Road vehicles - Symbols for controls, indicators and tell-tales
- 2958 Road vehicles - Exterior protection for passenger cars
- 3006 Road vehicles - Passenger car wheels for road use - Test methods
- 3046 Reciprocating internal combustion engines - Performance
- 3170 Petroleum liquids - Manual sampling
- 3208 Road vehicles - Evaluation of protrusions inside passenger cars
- 3409 Passenger cars - Lateral spacing of foot controls
- 3412 Road vehicles - Screened and waterproof spark-plugs and their connections - Types 1A and 1B
- 3468 Passenger cars - Windscreen defrosting and demisting systems - Test method
- 3469 Passenger cars - Windscreen washing systems - Test methods
- 3536 Road vehicles - Safety glazing materials - Vocabulary
- 3537 Road vehicles - Safety glazing materials - Mechanical tests
- 3538 Road vehicles - Safety glazing materials - Test methods for optical properties
- 3539 Road vehicles - Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11
- 3553 Road vehicles - High-tension connections for ignition coils and distributors
- 3560 Road vehicles - Frontal fixed barrier or pole impact test procedure
- 3583 Road vehicles - Pressure test connection for compressed-air pneumatic braking equipment
- 3584 Road vehicles - Drawbar couplings - Interchangeability
- 3691 Industrial trucks - Safety requirements and verification
- 3731 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage
- 3732 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage
- 3779 Road vehicles - Vehicle identification number (VIN) - Content and structure
- 3780 Road vehicles - World manufacturer identifier (WMI) code
- 3784 Road vehicles - Measurement of impact velocity in collision tests
- 3795 Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
- 3803 Road vehicles - Hydraulic pressure test connection for braking equipment
- 3808 Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements
- 3832 Passenger cars - Luggage compartments - Method of measuring reference volume
- 3833 Road vehicles - Types - Terms and definitions
- 3842 Road vehicles - Fifth wheels - Interchangeability
- 3853 Road vehicles - Towing vehicle coupling device to tow caravans or light trailers - Mechanical strength test
- 3871 Road vehicles - Labelling of containers for petroleum-based or non-petroleum-based brake fluid
- 3888 Passenger cars - Test track for a severe lane-change manoeuvre
- 3894 Road vehicles - Wheels/rims for commercial vehicles - Test methods
- 3895 Road vehicles - Screened and waterproof spark-plug and its connection - Type 2
- 3896 Road vehicles - Screened and waterproof spark-plug and its connection - Type 3
- 3917 Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
- 3929 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
- 3958 Passenger cars - Driver hand-control reach
- 3977 Gas turbines - Procurement
- 3984 Road vehicles - Rear moving barrier impact test procedure
- 3996 Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
- 4000 Passenger car tyres and rims
- 4008 Road vehicles - Fuel injection pump testing
- 4020 Road vehicles - Fuel filters for diesel engines - Test methods
- 4024 Road vehicles - Ignition coils - Low-tension cable connections
- 4030 Road vehicles - Vehicle identification number (VIN) - Location and attachment
- 4038 Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings
- 4039 Road vehicles - Pneumatic braking systems
- 4040 Road vehicles - Location of hand controls, indicators and tell-tales in motor vehicles
- 4082 Road vehicles - Motor vehicles - Flasher units
- 4086 Road vehicles - 90 semi-trailer fifth wheel kingpin - Interchangeability
- 4091 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements
- 4100 Road vehicles - World parts manufacturer identifier (WPMI) code
- 4106 Motorcycles - Engine test code - Net power
- 4113 Road vehicles - Calibration fluids for diesel injection equipment
- 4129 Road vehicles - Mopeds - Symbols for controls, indicators and tell-tales
- 4130 Road vehicles - Three-dimensional reference system and fiducial marks - Definitions
- 4131 Road vehicles - Dimensional codes for passenger cars
- 4138 Passenger cars - Steady-state circular driving behaviour - Open-loop test methods
- 4141 Road vehicles - Multi-core connecting cables
- 4148 Road vehicles - Special warning lamps - Dimensions
- 4151 Road vehicles - Mopeds - Type, location and functions of controls
- 4165 Road vehicles - Electrical connections - Double-pole connection
- 4210 Cycles - Safety requirements for bicycles
- 4254 Agricultural machinery - Safety
- 4513 Road vehicles - Visibility - Method for establishment of eyellipses for driver's eye location
- 4925 Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems
- 4926 Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids
- 4927 Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
- 4928 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
- 4929 Road vehicles - Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
- 4930 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
- 5128 Acoustics - Measurement of noise inside motor vehicles
- 5130 Acoustics - Measurements of sound pressure level emitted by stationary road vehicles
- 5422 Road vehicles - Anchorages for towing ropes, cables or bars
- 5740 Road vehicles - Rear view mirrors - Test method for determining reflectance
- 5775 Bicycle tyres and rims
- 5898 Passenger cars - Rear-window defrosting system - Test method
- 6054 Motorcycle tyres and rims (Code-designated series) - Diameter codes 4 to 12
- 6117 Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
- 6118 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
- 6119 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
- 6120 Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
- 6255 Passenger cars - Rear-window washing and wiping systems - Test methods
- 6310 Road vehicles - Brake linings - Compressive strain test methods
- 6311 Road vehicles - Brake linings - Internal shear strength of lining material - Test procedure
- 6312 Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies
- 6313 Road vehicles - Brake linings - Effects of heat on dimensions and form of disc brake pads - Test procedure
- 6314 Road vehicles - Brake linings - Resistance to water, saline solution, oil and brake fluid - Test procedure
- 6315 Road vehicles - Brake linings - Seizure to ferrous mating surface due to corrosion - Test procedure
- 6460 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption
- 6469 Electrically propelled road vehicles - Safety specifications
- 6487 Road vehicles - Measurement techniques in impact tests - Instrumentation
- 6518 Road vehicles - Ignition systems
- 6546 Road vehicles - Collection of accident data for evaluation of occupant restraint performance
- 6550 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing
- 6597 Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures
- 6621 Internal combustion engines - Piston rings
- 6622 Internal combustion engines - Piston rings
- 6623 Internal combustion engines - Piston rings - Scraper rings made of cast iron
- 6626 Internal combustion engines - Piston rings
- 6627 Internal combustion engines - Piston rings - Expander/segment oil-control rings
- 6692 Cycles - Marking of cycle components
- 6695 Cycles - Pedal axle and crank assembly with square end fitting - Assembly dimensions
- 6696 Cycles - Screw threads used in bottom bracket assemblies
- 6697 Cycles - Hubs and freewheels - Assembly dimensions
- 6698 Cycles - Screw threads used to assemble freewheels on bicycle hubs
- 6699 Cycles - Stem and handlebar bend - Assembly dimensions
- 6701 Cycles - External dimensions of spoke nipples
- 6722 Road vehicles - 60 V and 600 V single-core cables
- 6725 Road vehicles - Dimensions of two-wheeled mopeds and motorcycles - Terms and definitions
- 6726 Mopeds and motorcycles with two wheels - Masses - Vocabulary
- 6727 Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales
- 6742 Cycles - Lighting and retro-reflective devices - Photometric and physical requirements
- 6743 Lubricants, industrial oils and related products (class L) - Classification
- 6786 Road vehicles - Air braking systems - Identification of connections on units
- 6797 Road vehicles - Motor vehicles - Production conformity requirements for flasher units
- 6813 Road vehicles - Collision classification - Terminology
- 6826 Reciprocating internal combustion engines - Fire protection
- 6855 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption
- 6856 Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements
- 6969 Road vehicles - Sound signalling devices - Tests after mounting on vehicle
- 7030 Road vehicles - Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19
- 7117 Motorcycles - Measurement method for determining maximum speed
- 7141 Road vehicles - Light alloy wheels - Impact test
- 7308 Road vehicles - Petroleum-based brake-fluid for stored-energy hydraulic brakes
- 7309 Road vehicles - Hydraulic braking systems - ISO reference petroleum base fluid
- 7375 Road vehicles - Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles
- 7397 Passenger cars - Verification of driver's direct field of view
- 7398 Motorcycles - Direct current flasher units
- 7399 Motorcycles - Alternating current flasher units
- 7401 Road vehicles - Lateral transient response test methods - Open-loop test methods
- 7440 Road vehicles - Fuel injection equipment testing
- 7575 Commercial road vehicles - Flat attachment wheel fixing nuts
- 7576 Road vehicles - Two-stage fuel filters for compression-ignition engines - Mounting and connecting dimensions
- 7578 Road vehicles - Sheath-type glow-plugs - General requirements and test methods
- 7588 Road vehicles - Electrical/electronic switching devices
- 7591 Road vehicles - Retro-reflective registration plates for motor vehicles and trailers - Specification
- 7628 Road vehicles - Thermoplastics tubing for air braking systems
- 7629 Road vehicles - Brake linings - Disc brake pads - Evaluation of surface and material flaws after testing
- 7630 Road vehicles - Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
- 7631 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
- 7632 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
- 7633 Road vehicles - Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
- 7634 Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions - Test procedures
- 7635 Road vehicles - Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions - Test procedures
- 7637 Road vehicles - Electrical disturbances from conduction and coupling
- 7638 Road vehicles - Connectors for the electrical connection of towing and towed vehicles
- 7639 Road vehicles - Diagnostic systems - Graphical symbols
- 7641 Road vehicles - Trailers up to 3,5 t - Calculation of the mechanical strength of steel drawbars
- 7648 Flywheel housings for reciprocating internal combustion engines - Nominal dimensions and tolerances
- 7649 Clutch housings for reciprocating internal combustion engines - Nominal dimensions and tolerances
- 7653 Road vehicles - Commercial vehicles - Couplings between power take-offs (PTO) and ancillary driven units
- 7654 Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions
- 7656 Commercial road vehicles - Dimensional codes
- 7707 Commercial road vehicles - Connections for rear-mounted power take-offs (PTO)
- 7736 Road vehicles - Car radio for front installation - Installation space including connections
- 7747 Road vehicles - Filter elements for full flow oil filters - Dimensions
- 7750 Road vehicles - Air filter elements for commercial vehicles - Dimensions
- 7803 Commercial road vehicles - Steering ball joints
- 7804 Commercial road vehicles - Side openings for truck power take-offs
- 7862 Road vehicles - Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
- 7975 Passenger cars - Braking in a turn - Open-loop test method
- 8035 Commercial road vehicles and buses over 3,5 t - Front towing attachments
- 8090 Cycles - Terminology
- 8092 Road vehicles - Connections for on-board electrical wiring harnesses
- 8093 Road vehicles - Diagnostic testing of electronic systems
- 8098 Cycles - Safety requirements for bicycles for young children
- 8123 Road vehicles - Diametral pitch starter motor pinions
- 8178 Reciprocating internal combustion engines - Exhaust emission measurement
- 8349 Road vehicles - Measurement of road surface friction
- 8356 Road vehicles - Diesel engines - Screw-in injector, type 22
- 8488 Cycles - Screw threads used to assemble head fittings on bicycle forks
- 8562 Cycles - Stem wedge angle
- 8644 Motorcycles - Light-alloy wheels - Test method
- 8710 Motorcycles - Brakes and brake systems - Tests and measurement methods
- 8714 Electric road vehicles - Reference energy consumption and range - Test procedures for passenger cars and light commercial vehicles
- 8715 Electric road vehicles - Road operating characteristics
- 8716 Road vehicles - Fifth wheel kingpins - Strength test
- 8717 Commercial road vehicles - Fifth wheel couplings - Strength tests
- 8718 Road vehicles - Drawbar couplings and eyes for hinged drawbars - Strength tests
- 8720 Passenger cars - Specifications for mechanical jacks
- 8721 Road vehicles - Measurement techniques in impact tests - Optical instrumentation
- 8755 Commercial road vehicles - 40 mm drawbar eye - Interchangeability
- 8820 Road vehicles - Fuse-links
- 8854 Road vehicles - Alternators with regulators - Test methods and general requirements
- 8855 Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary
- 8856 Road vehicles - Electrical performance of starter motors - Test methods and general requirements
- 9021 Motorcycles - Controls - Types, positions and functions
- 9103 Road vehicles - Compression-ignition engines - Screw-in injection nozzle holder, type 23
- 9128 Road vehicles - Graphical symbols to designate brake fluid types
- 9129 Motorcycles - Measurement methods for moments of inertia
- 9130 Motorcycles - Measurement method for location of centre of gravity
- 9131 Three-wheeled mopeds and motorcycles - Dimensions - Vocabulary
- 9132 Three-wheeled mopeds and motorcycles - Masses - Vocabulary
- 9141 Road vehicles - Diagnostic systems - Requirements for interchange of digital information
- 9158 Road vehicles - Nozzle spouts for unleaded gasoline
- 9159 Road vehicles - Nozzle spouts for leaded gasoline and diesel fuel
- 9258 Passenger cars - Wiper systems - Wiper blade length
- 9259 Passenger cars - Windscreen wiper systems - Wiper arm-to-blade connections
- 9367 Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements
- 9457 Road vehicles - Metric starter motor pinions
- 9458 Passenger cars - Starter motor electrical connections
- 9534 Road vehicles - Fuel pump electric connections
- 9565 Two-wheeled motorcycles - Parking stability of side- and centre-stands
- 9619 Passenger cars - Windscreen wiping systems - Test method
- 9704 Passenger cars - Wiper systems - Shaft ends and arm-holes
- 9815 Road vehicles - Passenger-car and trailer combinations - Lateral stability test
- 9816 Passenger cars - Power-off reaction of a vehicle in a turn - Open-loop test method
- 9817 Passenger cars - Engine cooling systems - Dimensions of pressure caps and their ramp seats on filler necks
- 9818 Passenger cars - Engine cooling systems - Test methods and marking of pressure caps
- 9987 Motorcycles - Measurement of variation of dipped beam inclination as a function of load
- 10191 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
- 10230 Cycles - Splined hub and sprocket - Mating dimensions
- 10231 Motorcycle tyres - Test methods for verifying tyre capabilities
- 10392 Road vehicles - Determination of centre of gravity
- 10455 Road vehicles - Dry ignition coils using rotating high-voltage distributor
- 10483 Road vehicles - Intelligent power switches
- 10486 Passenger cars - Car radio identification number (CRIN)
- 10487 Passenger cars - Connections for car radios
- 10521 Road vehicles - Road load
- 10597 Road vehicles - Flat attachment fixing nuts for commercial vehicles - Test methods
- 10604 Road vehicles - Measurement equipment for orientation of headlamp luminous beams
- 10605 Road vehicles - Test methods for electrical disturbances from electrostatic discharge
- 10681 Road vehicles - Communication on FlexRay
- 10816 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts
- 10844 Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres
- 10924 Road vehicles - Circuit breakers
- 10997 Passenger vehicles - Side impact with deformable moving barrier - Full scale test
- 11096 Road vehicles - Pedestrian protection - Impact test method for pedestrian thigh, leg and knee
- 11154 Road vehicles - Roof load carriers
- 11155 Road vehicles - Air filters for passenger compartments
- 11157 Road vehicles - Brake lining assemblies - Inertia dynamometer test method
- 11243 Cycles - Luggage carriers for bicycles - Concepts, classification and testing
- 11270 Intelligent transport systems - Lane keeping assistance systems (LKAS) - Performance requirements and test procedures
- 11406 Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability
- 11407 Commercial road vehicles - Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers - Interchangeability
- 11446 Road vehicles - Connectors for the electrical connection of towing and towed vehicles
- 11451 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy
- 11452 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
- 11460 Two-wheeled motorcycles - Positioning of lighting and light-signalling devices
- 11486 Motorcycles - Methods for setting running resistance on a chassis dynamometer
- 11519 Road vehicles - Low-speed serial data communication
- 11530 Road vehicles - Hydraulic jacks - Specifications
- 11555 Road vehicles - Stabilizing devices for caravans and light trailers
- 11565 Road vehicles - Spark-plugs - Test methods and requirements
- 11748 Road vehicles - Technical documentation of electrical and electronic systems
- 11841 Road vehicles and internal combustion engines - Filter vocabulary
- 11898 Road vehicles - Controller area network (CAN)
- 11954 Fuel cell road vehicles - Maximum speed measurement
- 11992 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles
- 12021 Road vehicles - Sensitivity to lateral wind - Open-loop test method using wind generator input
- 12097 Road vehicles - Airbag components
- 12098 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24 V nominal supply voltage
- 12103 Road vehicles - Test dust for filter evaluation
- 12158 Road vehicles - Braking systems - Temperature measuring methods
- 12161 Road vehicles - Endurance braking systems of motor vehicles and towed vehicles - Test procedures
- 12214 Road vehicles - Direction-of-motion stereotypes for automotive hand controls
- 12219 Interior air of road vehicles
- 12353 Road vehicles - Traffic accident analysis
- 12357 Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars
- 12364 Two-wheeled motorcycles - Antilock braking systems (ABS) - Tests and measurement methods
- 12405 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems
- 12614 Road vehicles - Liquefied natural gas (LNG) fuel system components
- 12619 Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components
- 12855 Electronic fee collection - Information exchange between service provision and toll charging
- 13043 Road vehicles - Refrigerant systems used in mobile air conditioning systems (MAC) - Safety requirements
- 13044 Road vehicles - 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations
- 13052 Road vehicles - Trailers up to 3,5 t - Requirements for jockey wheels and drawbar supports
- 13063 Electrically propelled mopeds and motorcycles - Safety specifications
- 13064 Battery-electric mopeds and motorcycles - Performance
- 13207 Road vehicles - LED lamp characteristics for bulb compatible failure detection
- 13209 Road vehicles - Open Test sequence eXchange format (OTX)
- 13215 Road vehicles - Reduction of misuse risk of child restraint systems
- 13216 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems
- 13218 Road vehicles - Child restraint systems - Report form for accidents involving child passengers
- 13232 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles
- 13331 Road vehicles - Filler pipes and openings of motor vehicle fuel tanks - Vapour recovery system
- 13400 Road vehicles - Diagnostic communication over Internet Protocol (DoIP)
- 13472 Acoustics - Measurement of sound absorption properties of road surfaces in situ
- 13476 Road vehicles - Ignition coils - Electrical characteristics and test methods
- 13486 Road vehicles - Hydraulic braking systems
- 13556 Road vehicles - Localization of exhaust system leaks and equipment specifications
- 13674 Road vehicles - Test method for the quantification of on-centre handling
- 13738 Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
- 13837 Road vehicles - Safety glazing materials - Method for the determination of solar transmittance
- 13988 Passenger vehicle wheels - Clip balance weight and rim flange nomenclature, test procedures and performance requirements
- 14229 Road vehicles - Unified diagnostic services (UDS)
- 14230 Road vehicles - Diagnostic communication over K-Line (DoK-Line)
- 14314 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements
- 14396 Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
- 14400 Road vehicles - Wheels and rims - Use, general maintenance and safety requirements and out-of-service conditions
- 14469 Road vehicles - Compressed natural gas (CNG) refuelling connector
- 14505 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles
- 14512 Passenger cars - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test procedure
- 14513 Road vehicles - Pedestrian protection - Head impact test method
- 14572 Road vehicles - Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables - Test methods and requirements for basic- and high-performance cables
- 14687 Hydrogen fuel - Product specification
- 14791 Road vehicles - Heavy commercial vehicle combinations and articulated buses - Lateral stability test methods
- 14792 Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests
- 14793 Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods
- 15005 Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures
- 15006 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation
- 15007 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems
- 15008 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation
- 15031 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics
- 15037 Road vehicles - Vehicle dynamics test methods
- 15082 Road vehicles - Tests for rigid plastic safety glazing materials
- 15118 Road vehicles - Vehicle to grid communication interface
- 15170 Road vehicles - Four-pole electrical connectors with pins and twist lock
- 15172 Road vehicles - Wheels - Nut seat strength tests
- 15459 Information technology - Unique identifiers
- 15484 Road vehicles - Brake lining friction materials - Product definition and quality assurance
- 15500 Road vehicles - Compressed natural gas (CNG) fuel system components
- 15501 Road vehicles - Compressed natural gas (CNG) fuel systems
- 15550 Internal combustion engines - Determination and method for the measurement of engine power - General requirements
- 15623 Intelligent transport systems - Forward vehicle collision warning systems - Performance requirements and test procedures
- 15745 Industrial automation systems and integration - Open systems application integration framework
- 15763 Road vehicles - Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
- 15764 Road vehicles - Extended data link security
- 15765 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN)
- 15828 Road vehicles - Offset frontal impact test procedure
- 15829 Road vehicles - Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
- 15830 Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy
- 16121 Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses
- 16183 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- 16185 Road vehicles - Engine families for certification of heavy-duty vehicles by Exhaust emission
- 16232 Road vehicles - Cleanliness of components of fluid circuits
- 16247 Road vehicles - Detection of exhaust system leaks - Helium test method and detection device specification
- 16380 Road vehicles - Blended fuels refuelling connector
- 16673 Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems
- 16750 Road vehicles - Environmental conditions and testing for electrical and electronic equipment
- 16833 Road vehicles - Wheels - Measurement of radial and lateral run-out
- 16844 Road vehicles - Tachograph systems
- 16845 Road vehicles - Controller area network (CAN) - Conformance test plan
- 16850 Road vehicles - Pedestrian protection - Child head impact test method
- 16898 Electrically propelled road vehicles - Dimensions and designation of secondary lithium-ion cells
- 17215 Road vehicles - Video communication interface for cameras (VCIC)
- 17287 Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving
- 17288 Passenger cars - Free-steer behaviour
- 17356 Road vehicles - Open interface for embedded automotive applications
- 17361 Intelligent transport systems - Lane departure warning systems - Performance requirements and test procedures
- 17373 Road vehicles - Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact
- 17386 Transport information and control systems - Manoeuvring Aids for Low Speed Operation (MALSO) - Performance requirements and test procedures
- 17458 Road vehicles - FlexRay communications system
- 17479 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
- 17949 Impact test procedures for road vehicles - Seating and positioning procedures for anthropomorphic test devices - Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions
- 18164 Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance
- 18207 Road vehicles - Trailers up to 3,5 t - Control of welded towing brackets for coupling ball after fatigue testing
- 18541 Road vehicles - Standardized access to automotive repair and maintenance information (RMI)
- 18542 Road vehicles - Standardized repair and maintenance information (RMI) terminology
- 18669 Internal combustion engines - Piston pins
- 18868 Commercial road vehicles - Coupling equipment between vehicles in multiple vehicle combinations - Strength requirements
- 19072 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections
- 19813 Road vehicles - Ignition systems - Test methods and requirements for high voltage boots on plug-top coils and pencil coils
- 20176 Road vehicles - H-point machine (HPM-II) - Specifications and procedure for H-point determination
- 20653 Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
- 20828 Road vehicles - Security certificate management
- 20860 Road vehicles - 50 ohms impedance radio frequency connection system interface
- 20918 Road vehicles - Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems - Test with roller brake tester
- 21006 Internal combustion engines - Engine weight (mass) declaration
- 21069 Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester
- 21308 Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP)
- 21750 Road vehicles - Safety enhancement in conjunction with tyre inflation pressure monitoring
- 21848 Road vehicles - Electrical and electronic equipment for a supply voltage of 42 V - Electrical loads
- 21994 Passenger cars - Stopping distance at straight-line braking with ABS - Open-loop test method
- 21995 Road vehicles - Test of vehicle air braking systems with a permissible mass of over 3,5 t - Acquisition and use of reference values using a roller brake tester
- 22241 Diesel engines - NOx reduction agent AUS 32
- 22628 Road vehicles - Recyclability and recoverability - Calculation method
- 22839 Intelligent transport systems - Forward vehicle collision mitigation systems - Operation, performance, and verification requirements
- 22840 Intelligent transport systems - Devices to aid reverse manoeuvres - Extended-range backing aid systems (ERBA)
- 22896 Road vehicles - Deployment and sensor bus for occupant safety systems
- 22900 Road vehicles - Modular vehicle communication interface (MVCI)
- 22901 Road vehicles - Open diagnostic data exchange (ODX)
- 22902 Road vehicles - Automotive multimedia interface
- 23273 Fuel cell road vehicles - Safety specifications - Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
- 23274 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements
- 23671 Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres
- 23828 Fuel cell road vehicles - Energy consumption measurement - Vehicles fuelled with compressed hydrogen
- 24254 Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB)
- 25981 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
- 26021 Road vehicles - End-of-life activation of on-board pyrotechnic devices
- 26022 Road vehicles - Ergonomic aspects of transport information and control systems - Simulated lane change test to assess in-vehicle secondary task demand
- 26262 Road vehicles - Functional safety
- 26865 Road vehicles - Brake lining friction materials - Standard performance test procedure for commercial vehicles with air brakes
- 26866 Road vehicles - Brake lining friction materials - Standard wear test procedure for commercial vehicles with air brakes
- 26867 Road vehicles - Brake lining friction materials - Friction behaviour assessment for automotive brake systems
- 27145 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements
- 27667 Road vehicles - Brake lining friction materials - Evaluation of corrosion effects on painted backing plates and brake shoes
- 27955 Road vehicles - Securing of cargo in passenger cars, station wagons and multi-purpose vehicles - Requirements and test methods
- 27956 Road vehicles - Securing of cargo in delivery vans - Requirements and test methods
- 28580 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results
- 28741 Road vehicles - Spark-plugs and their cylinder head housings - Basic characteristics and dimensions
- 29061 Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems