International Journal of Crashworthiness
Weltweit verbreitete, seit 1996 erscheinende Fachzeitschrift, die von der Taylor & Francis Group verlegt wird. Es wird nicht nur über das Crashverhalten von Landfahrzeugen, sondern auch von Schiffen, Flugzeugen und Raumfahrzeugen berichtet.
Erscheinungsweise: 6 x jährlich
1996 | 1997 | 1998 | 1999 | ||||||
2000 | 2001 | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 |
2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 |
2015
2014
2013
2012
2011
2010
2009
Issue 6
- Frontal crash severity in different road environments measured in real-world crashes
- Identification of lumped parameter automotive crash models for bumper system development
- Driven dart impact response and simulation of a multi-layer HDPE (high-density polyethylene)
- Automatic generation and validation of patient-specific finite element head models suitable for crashworthiness analysis
- Full-scale vertical drop test and numerical simulation of a crashworthy helicopter seat/occupant system
- Simulation analysis of human neck injury risk under high-level landing impact
- Effects of the triggering of circular aluminum tubes on crashworthiness
- Improving the crashworthiness characteristics of cylindrical tubes subjected to axial compression by cutting wide grooves from their outer surface
- Variation in crash severity depending on different vehicle types and objects as collision partner
- Bus rollover crashworthiness under European standard: an optimal analysis of superstructure strength using successive response surface method
- Analytical Matlab/Simulink model of pyrotechnical gas generators for airbags
Issue 5
- Energy-absorption capability of multi-axial warp-knitted FRP tubes
- Variation of road traffic crashes among drivers and passengers
- Vibration of stiffened plates with cutout under concentrated load
- Numerical and experimental investigations on the behaviour of the sandwiched tube-type airbag
- Application of aluminium honeycomb model using shell elements to offset deformable barrier model
- Challenge and approach to real-world pedestrian protection – investigated by Polar-II pedestrian dummy
- Impact strength and response behaviour of CFRP (carbon fibre reinforced plastic) guarder belt for side collision of automobiles
- Investigating the possible role of placenta position in road accident consecutive foetal loss
- The effect of seatbelt tensioner for pregnant female drivers involved in rear-end vehicle collisions
- The effect of the implementation of circular holes as crush initiators to the crushing characteristics of mild steel square tubes: experimental and numerical simulation
- Three-dimensional multibody dynamics analysis of accidental falls resulting in traumatic brain injury
- Search for pedestrian protection regulations for commercial vehicles
- Erratum: The kinematic behaviour and responses of Hybrid III 3YO dummy and child human FE model in ISOFIX CRS in frontal impact
Issue 4
- Effects of incidence angle in bird strike on integrity of aero-engine fan blade
- Mobile phone and seat belt usage and its impact on road accident fatalities and injuries in southeast Iran
- A method to improve the energy absorption capability of fibre-reinforced composite tubes
- Control-oriented modelling of occupants in frontal impacts
- Response of lower limb in full-scale car–pedestrian low-speed lateral impact – influence of muscle contraction
- Application of foam-filled conical tubes in enhancing the crashworthiness performance of vehicle protective structures
- Experimental investigation of the collapse modes and energy absorption characteristics of composite tubes
- MADYMO reconstruction of a real-world collision between a vehicle and cyclist
- The kinematic behaviour and responses of Hybrid III 3YO dummy and child human FE model in ISOFIX CRS in frontal impact
Issue 3 (Special Issue: Advanced Protection Systems (APROSYS): Part 2)
- Guest Editors' Note
- Scaling head-neck response data and derivation of 5th percentile female side-impact dummy head-neck response requirements in NBDL (Naval Biodynamics Laboratory) test conditions
- On the consequences of non linear constitutive modelling of brain tissue for injury prediction with numerical head models
- Influence of pedestrian head surrogate and boundary conditions on head injury risk prediction
- AlSi7 metallic foams – aspects of material modelling for crash analysis
- Robustness analysis through virtual testing
Issue 2
- Finite element based robustness study of a truck cab subjected to impact loading
- A comparative study of design optimisation methodologies for side-impact crashworthiness, using injury-based versus energy-based criterion
- Comparison of human FE model and crash dummy responses in various child restraint systems
- Child safety analysis for forward-facing child restraint system in frontal impact
- The relationship of injury risk to accident severity in impacts with roadside barriers
- Off-axis compression behaviour of honeycomb core in WT-plane
- Emerging trend in motorisation and the epidemic of road traffic crashes in an economically growing country
- Preliminary investigation of driver head dynamics during impact of a small car with a high-containment safety barrier
- Design and analysis of Annisquam River Bridge railing
- Development of a finite element model of the knee-thigh-hip of a 50th percentile male including ligaments and muscles
Issue 1
- Materials characterisation and crash modelling of composite-aluminium honeycomb sandwich material
- Energy absorption properties of braided glass/epoxy tubes subjected to quasi-static axial crushing
- A study on introduction of notch into thin-walled polygonal shell member to control plastic buckling behaviour in axial collapse
- Impact perforation of sandwich panels with Coremat®
- Improving the accuracy of vehicle crashworthiness response predictions using an ensemble of metamodels
- Crack analysis in PVB laminated windshield impacted by pedestrian head in traffic accident
- Thermal buckling of laminated composite conical shell panel with and without piezoelectric layer with random material properties
- Improvement of crashworthiness behaviour for simplified structural models of aircraft fuselage
- Load path distribution within the pelvic structure under lateral loading
2008
Issue 6 (Special Issue: Advanced Protection Systems (APROSYS): Part 1)
- Editorial: Special Issue dedicated to the EU Integrated Project Advanced Protection Systems (APROSYS)
- APROSYS: Advances in secondary safety research
- A generic evaluation methodology for advanced safety systems
- Improvements to the protection of vulnerable road users: Retrofittable, energy-absorbing front end for heavy goods vehicles
- APROSYS in-depth database of serious pedestrian and cyclist impacts with vehicles
- A first step in computer modelling of the active human response in a far-side impact
- Injury criteria implementation and evaluation in FE models applications to lower limb segments
- Improved head injury criteria based on head FE model
- A new pre-crash system for side impact protection
- Reliability analysis of a crashed thin-walled s-rail accounting for random spot weld failures
Issue 5
- A study of the pedestrian impact kinematics using finite element dummy models: the corridors and dimensional analysis scaling of upper-body trajectories
- BioRID II manikin and human seating position in relation to car head restraint
- The importance of muscle tension on the outcome of impacts with a major vertical component
- Impact behaviour of a multi-body system with energy dissipation
- Numerical simulation of aircraft interior components under crash loads
- Structural polyurethane foam: testing and modelling for automotive applications
- Effectiveness and evaluation of SEAS (secondary energy absorbing structure) of SUV in frontal impact
- Design optimisation of tapered thin-walled square tubes
- Compatibility between sports-utility vehicles and sedan-type vehicles
- Characterisation and modelling of short fibre reinforced polymers for numerical simulation of a crash
- Design of motorcyclist-friendly guardrail using finite element analysis
- Development of an embedded vehicle safety system for frontal crash detection
Issue 4
- Experimental investigation of the collapse modes and the main crushing characteristics of composite sandwich panels subjected to flexural loading
- Modelling the effect of forming history in impact simulations: evaluation of the effect of thickness change and strain hardening based on experiments
- Analysis of traumatic brain injury due to primary head contact during vehicle-to-pedestrian impact
- Numerical (analytical-based) model for the study of vehicle frontal collision
- Polymer composites for the automotive industry: characterisation of the recycling effect on the strain rate sensitivity
- C IV class tram crashworthiness assessment
- Crash performance of X-shaped support base work zone temporary sign structures
- Virtual modelling of safety helmets: practical problems
Issue 3
- Structural and impact behaviour of an innovative low-cost sandwich panel
- Energy-absorption capability of thin laminates subjected to heavy-mass projectile impact of varying nose geometries
- Simulated evaluation of pedestrian safety for flat-front vehicles
- Development of a fluid-filled catheter system for dynamic pressure measurement in soft-tissue trauma
- Design of ventilated helmets: computational fluid and impact dynamics studies
- A two-stage multi-objective optimisation of vehicle crashworthiness under frontal impact
- Frontal thoracic response to dynamic loading: the role of superficial tissues, viscera and the rib cage
- Development of a finite element model of the shoulder: application during a side impact
- Three-dimensional finite element simulation of pelvic fracture during side impact with pelvis–femur–soft tissue complex
- Role of gender and driver behaviour in road traffic crashes
- Predicting brain injury under impact with a strain measure from analytical models
Issue 2
- Static axial collapse of foam-filled steel thin-walled rectangular tubes: experimental and numerical simulation
- Experimental observations of AA6061-T6 round extrusions under a cutting deformation mode with a deflector
- Design and application of an instrumented projectile for load measurements during impact
- Performance analysis of a bumper–pedestrian contact sensor system by using finite element models
- Multiphysics out of position airbag simulation
- Enhancing the impact energy absorption in roll over protective structures
- Aerodynamic design of high-sided coaches to reduce cross-wind sensitivity, based on wind tunnel tests
- Loading behaviour of 90° ‘UREAD’ energy channels
- Crashes with roadside objects along motorcycle lanes in Malaysia
- A reduced-order finite element model for the simulation of automotive side structure crash response
- Single-vehicle collisions in Europe: analysis using real-world and crash-test data
Issue 1
- Investigating the effects of strengthening the crossbeam in frontal car-to-car impacts
- Interactions among structural components during complex impact events
- Influence of occupant restraint system on traumatic brain injuries
- Vehicle/occupant movement in moderate speed in-line collisions
- A measurement study of a pressure transducer subjected to water drop impact
- A review of airbag test and analysis
- Trailer truck-mounted attenuator
- Modelling motorcyclist injury severity resulting from sideswipe collisions at T-junctions in the United Kingdom: new insights into the effects of manoeuvres
- Optimum design for energy absorption of bitubal hexagonal columns with honeycomb core
- Bending of cylindrical steel tubes: numerical simulation using Grid computing
2007
Issue 6
- The influence of seat structure and passenger weight on the rollover crashworthiness of an intercity coach
- A design optimization approach of vehicle hood for pedestrian protection
- Validation of the simplified super folding element theory applied for axial crushing of complex aluminium extrusions
- Development of simplified thin-walled beam models for crashworthiness analyses
- Diving versus roof intrusion: a review of rollover injury causation
- Child restraint seat design considerations to mitigate injuries to three-year-old children in side impact crashes
- Mechanism analysis of pedestrian knee-bending angle by SUV type vehicles using human FE model
- Reconstruction of pedestrian–vehicle accident using sequential linear programming optimizer
- Topology optimization of energy-absorbing structures
- Crash performance of cellular foams with reduced relative density part 1: rib thickness variation
- Crash performance of cellular foams with reduced relative density part 2: rib deletion
Issue 5
- Model characterization and failure analysis of welded aluminium components including process history
- Numerical studies concerning upper neck and head responses in frontal crashes with seat-integrated safety belts
- Realistic simulation models for airbags and humans–new possibilities and limits of FE simulation
- Expansion of circular tubes by rigid tubes as impact energy absorbers: experimental and theoretical investigation
- Development of simplified finite element models for straight thin-walled tubes with octagonal cross section
- Material and structural crashworthiness characterization of paratransit buses
- Detailed tire modeling for crash applications
- Pre-crash investigation using a driving simulator and numerical analyses to determine the influence of the arms positions
- Consideration of vehicle handling and stability with improved roof strength
- The localized low-velocity impact response of aluminium honeycombs and sandwich panels for occupant head protection: experimental characterization and analytical modelling
- Issues in ALE simulation of airbags
Issue 4
- Mechanism analysis of pedestrian knee-bending angle by sedan-type vehicle using human FE model
- The effect of brain mass and moment of inertia on relative brain–skull displacement during low-severity impacts
- Modelling the effects of an inflatable tubular structure (ITS) on occupant kinematics and injury risk in the rollover of a sports utility vehicle (SUV)
- Modelling and simulation of seat-integrated safety belts including studies of pelvis and torso responses in frontal crashes
- Evaluation of knee injury threshold in pedestrian–car crash loading using numerical approach
- Setting initial targets in vehicle side impact safety design using regression-based modeling
- A review of composite structures subjected to dynamic loading
- Smart head restraint system
- Multi-scale and multi-model methods for efficient crash simulation
Issue 3
- Bicycle helmet retention system testing and evaluation
- Structural response of paratransit buses in rollover accidents
- Real accidents involving vulnerable road users: in-depth investigation, numerical simulation and experimental reconstitution with PMHS
- The development of a load sensing trolley for frontal offset testing
- Identification of the spongy bone mechanical behavior under compression loads: numerical simulation versus experimental results
- Crashworthiness optimization of empty and filled aluminum crash boxes
- Comparison of the load/displacement and energy absorption performance of round and square AA6061-T6 extrusions under a cutting deformation mode
- Benchmarking and accident characteristics of flat-fronted commercial vehicles with respect to pedestrian safety
- Experimental study on the interface fracture toughness of PVB (polyvinyl butyral)/glass at high strain rates
- Polymer foams to optimize passive safety structures in helmets
- Study of a device for controlling the pulses of sled testing
- Conditions of possible head impacts for standing passengers in public transportation: an experimental study
Issue 2
- A new crash test configuration for car-to-car frontal collisions with small lateral overlap
- Experimental study of the bone behaviour of the human skull bone for the development of a physical head model
- Restrained occupant protection performance under rollover conditions using an intelligent rollover protection subsystem
- Safety barrier performance predicted by multi-body dynamics simulation
- Estimating bicyclist into pedestrian collision speed
- Car-car crash compatibility: development of crash test procedures in the VC-Compat project
- Experimental and simulated flexion tests of humerus
- Advanced smart airbags: The solution for real-life safety?
- Application of the finite element method to predict the crashworthy response of a metallic helicopter underfloor structure onto a hard surface
- An algorithm for optimised generation of a finite element mesh for folded airbags
Issue 1
- Numerical simulations of motorcycle helmet impact tests
- An experimental methodology for evaluating survivability of an aeronautical construction from composite materials: An overview
- Natural optima in human skull: a low-velocity impact study
- Train's crashworthiness design and collision analysis
- Rollover far side roof strength test and simulation
- Reinforcement of vehicle roof structure system against rollover occupant injuries
- A new analytical model for high-velocity impact of thick composites
- Observations from repeatable dynamic rollover tests
- A road vehicle multibody model for crash simulation based on the plastic hinges approach to structural deformations
2006
Issue 6
- An elastic–plastic free–free beam under asymmetric normal and oblique impact
- A methodology for the simulation of out-of-position driver airbag deployment
- Finite element analysis of seat belt bunching phenomena
- Thoracic deformation response of pedestrians resulting from vehicle impact
- A study of an Asian anthropometric pedestrian in vehicle–pedestrian accidents using real-world accident data
- Modeling of car seat and human body interaction under rear impact
- Multi-directional optimisation against biomechanical criteria of a head–helmet coupling
- The development of a new low-speed impact test to improve bumper performance and compatibility
- Efficiency and identification procedures of damage models in dynamic
- Implementation of composite roof structures in transit buses to increase rollover roof strength and reduce the likelihood of rollover
- Assessment criteria for assessing energy-absorbing front underrun protection on trucks
Issue 5
- An experimental investigation on the behaviour of self-piercing riveted connections in aluminium alloy AA6060
- Evaluation of passenger railroad car roll over crashworthiness
- Experimental evaluation of the wheelchair occupant protection under different impact conditions using commercial wheelchairs
- Analysis of Nij in simulated real-world crashes with a 3-year-old Hybrid-III
- The effect of mobile phone use on driving style and driving skills
- Crash analysis and modeling of two vehicles in frontal collisions using two types of smart front-end structures: an analytical approach using IHBMA (Incremental Harmonic Balance Method)
- Computer modeling of lift trucks and operators to simulate lateral tipover
- Rollover crashworthiness of a rural transport vehicle using MADYMO
Issue 4
- An offset rigid barrier-based test: equivalence to the Insurance Institute for Highway Safety frontal offset impact safety test
- Numerical simulation of fluid–structure interaction of liquid cargo filled tank during ship collision using the ALE finite element method
- Offset impact behaviour of bumper beam—longitudinal systems: experimental investigations
- Offset impact behaviour of bumper beam–longitudinal systems: numerical simulations
- Positioning of motorcyclist dummies in crash simulations
- Effects of pre-impact pedestrian position and motion on kinematics and injuries from vehicle and ground contact
- Elements of passive safety of railway vehicles in collision
- Effect of tensile properties on the energy-absorbing capacity of weld-bonded austenitic stainless steel profiles
- A hybrid technique for determining optimal restraint system characteristics
Issue 3
- Bird strike simulation on a novel composite leading edge design
- Multi-scale human body model to predict side impact thoracic trauma
- Parametric effects on the performance of traffic light poles in vehicle crashes
- Optimisation of energy absorption of an A-pillar by metal foam insert
- Evaluation of frontal occupant protection system responses to crash pulse variations
- Bending collapse of thin-walled beams with channel cross-section
- Simplified modelling of thin-walled box section beam
- The influence of a flexible lumbar spine in far-side impact testing
Issue 2
- Proposal of injury risk curves for evaluating pedestrian femur/pelvis injury risk using EEVC upper legform impactor based on accident reconstruction
- Dynamic response of laminated automotive glazing impacted by spherical featureless headform
- Finite element analysis of cyclist lower limb response in car—bicycle accident
- Experimental study on energy absorption characteristics of motorcycle front wheel—tyre assembly in frontal impact
- Development and testing of a non-energy-absorbing anchorage system for roadside poles
- Projectile impact on sandwich panels
- Numerical modeling of a dual crush mode welded aluminum crash structure
- Finite element modelling of the crushing response of composite sandwich panels with FRP tubular reinforcements
Issue 1
- Influence of damage on the prediction of axial crushing behavior of thin-walled aluminum extruded tubes
- An improved representation of vehicle incompatibility in frontal NCAP tests using a modified rigid barrier
- A simplified test methodology for crashworthiness evaluation of aircraft seat cushions
- Bending of cylindrical steel tubes: numerical modelling
- Assessment of vehicle roof crush test protocols using FE models: inverted drop tests versus updated FMVSS No. 216
- Evaluation of head injury criteria using a finite element model validated against experiments on localized brain motion, intracerebral acceleration, and intracranial pressure
- Feedback control of occupant motion during a crash
2005
Issue 6
- Influence of head restraint position on long-term AIS 1 neck injury risk
- Influence of muscle preactivation of the lower limb on impact dynamics in the case of frontal collision
- Limiting performance analysis of biomechanical systems for optimal injury control – Part 1: Theory and methodology
- Limiting performance analysis of biomechanical systems for optimal injury control – Part 2: Applications
- Quantification of constant stiffness force-shortening model parameters for vehicles tested under United States side impact protocols
- Proposed variable stiffness of vehicle longitudinal frontal members
- Transition from progressive to global buckling of aluminium extrusions – a numerical study
- Load/displacement and energy absorption performances of AA6061-T6 tubes under a cutting deformation mode
- Combination of grey model GM(1, 1) with three-point moving average for accurate vehicle fatality risk prediction
Issue 5
- Wind forces and aerodynamics: contributing factors to compromise bus and coach safety?
- Finite point method: a new approach to model the inflation of side curtain airbags
- Local structural force evaluation of a vehicle in side barrier impacts
- Modeling slip base mechanisms
- Test procedures for vehicle compatibility evaluation
- Evaluation of fleet systems model for vehicle compatibility
- Effects of front wheels and steering-suspension systems during vehicle oblique collisions with a flared guardrail terminal
- Numerical simulation of thin-walled metallic circular frusta subjected to axial loading
- Design, fabrication and testing of a component HIC tester for aircraft applications
- Design of HIC compliant aircraft bulkheads and cabin class divider panels
- Experimental and numerical analyses of the axial crushing behaviour of hat sections partially filled with aluminium foam
Issue 4
- FE simulations of motorcycle—car frontal crashes, validations and observations
- Motorcycle crash tests — an overview
- Safety performance evaluation of secure mailboxes using finite element simulations and crash testing
- Sled tests and CIREN data illustrating the benefits of booster seats
- Design and sled testing of a high back booster seat prototype offering improved side impact protection
- Structural adaptivity in frontal collisions: implications on crash pulse characteristics
- Initiation and propagation of damage in laminated composite shells due to low velocity impact
- Nonlinear impact behaviour of laminated composite shells in hygrothermal environments
- Dynamic stability of stiffened plates with cutout subjected to harmonic in-plane partial edge loading
- Numerical simulation of mow strip subcomponents used with strong post guardrail systems
Issue 3
- Crack initiation in laminated automotive glazing subjected to simulated head impact
- Initialisation of volume fraction in fluid/structure interaction problem
- Designing for head impact safety using a combination of lumped parameter and finite element modeling
- Development of FE meshes for folded airbags
- Finite element modeling and validation of a 3-strand cable guardrail system
- Bending hinge characteristic of thin-walled square tubes
- Axial crushing performance of braided composite tubes
- Cervical spine injuries sustained by motorcyclists in road crashes in Malaysia
- The effect of using universal anchorages in child restraint seats on the injury potential for children in frontal crash
Issue 2
- Analysis of crush behaviours of a rail cab car and structural modifications for improved crashworthiness
- Wheel impact performance with consideration of material inhomogeneity and a simplified approach for modeling
- Comparison of shoulder range-of-motion and stiffness between volunteers, Hybrid III and THOR Alpha in static frontal impact loading
- Numerical simulations of multiple vehicle crashes and multidisciplinary crashworthiness optimization
- Crash simulation of a vertical drop test of a commuter-class aircraft
- A numerical study on the quasi-static axial crush characteristics of square aluminum tubes with chamfering and other triggering mechanisms
- Characteristics of 3.5 kg pedestrian headform impactor prototypes developed by JAMA–JARI and ACEA–TNO
- A study of injury parameters for rearward and forward facing 3-year-old child dummy using numerical simulation
Issue 1
- An assessment of constitutive models of concrete in the crashworthiness simulation of roadside safety structures
- An experimental investigation into the energy absorption and force/displacement characteristics of aluminum foam filled braided stainless steel tubes under quasistatic tensile loading conditions
- Ear injury from air bag deployment noise?
- Modelling bird impacts on an aircraft wing – Part 1: Material modelling of the fibre metal laminate leading edge material with continuum damage mechanics
- Modelling bird impacts on an aircraft wing – Part 2: Modelling the impact with an SPH bird model
- Frontal collision behaviour: Comparison of onboard collision recorder data with car population characteristics
- Kinematics and injury pattern in rollover accidents of cars in German road traffic – an in-depth-analysis by GIDAS
- Dynamic characterization of polymers to improve numerical simulations for passive safety
- Cervical muscle response to trunk flexion in whiplash-type right lateral impacts
- Development of a mathematical model for evaluating child occupant behaviour in the case of a vehicle side impact simulation
2004
Issue 6
- Development and validation of a vehicle suspension finite element model for use in crash simulations
- Evaluation of structural parameters for vehicle crash compatibility
- Car structural characteristics of fatal frontal crashes in Sweden
- The effect of occupant position in volunteers subjected to whiplash-type rear impacts
- Tolerance of the human leg and thigh in dynamic latero-medial bending
- Designing for safety during pregnancy through a system for automotive engineers
- Predicting fractures due to blunt impact: a sensitivity analysis of the effects of altering failure strain of human rib cortical bone
- A parametric study of the bending crash performance of empty and metal foam-filled box-beams
- Numerical modelling of quasi-static axial crush of square aluminium-composite hybrid tubes
- A new approach for safety crash test: using a genetic algorithm
Issue 5
- A comprehensive failure model for crashworthiness simulation of aluminium extrusions
- A computational model of the human head and neck system for the analysis of whiplash motion
- A methodology to assess frontal stiffness to improve crash compatibility
- Design of train crash experimental tests by optimization procedures
- Static and dynamic roof crush simulation using LS-DYNA3D
- Tank instructor module crash simulation
- A study of modelling approaches for rail vehicle collision behaviour
- Crashworthiness analysis of the Placentia, CA rail collision
- Finite element modelling of the human head-neck: modal analysis and validation in the frequency domain
- Compartment strength and its evaluation in car crashes
Issue 4
- Assessment of basic experimental impact simulations for coupled fluid/structure interactions modeling
- A visco-elastic foam as head restraint material – experiments and numerical simulations using a biorid model
- Design and analysis of an aluminum F-shape bridge railing
- Optimization of single skin surfaces for head injury prevention – a comparison of optima calculated for global versus local injury thresholds
- Failure analysis of arbitrarily shaped human skull due to impact
- Dynamic simulation and energy absorption of tapered tubes under impact loading
- Influence of FE model variability in predicting brain motion and intracranial pressure changes in head impact simulations
- An investigation into the head and neck injury potential of three-year-old children in forward and rearward facing child safety seats
- Finite element simulation of internally grooved thin-wall PVC tubes subjected to axial plastic collapse
Issue 3
- Preliminary analysis of fuel tank impact
- Compatibility between passenger vehicles and road barriers during oblique collisions
- Evaluation of a singular value decomposition approach for impact dynamic data correlation
- Numerical simulation of the crushing process of composite materials
- Structural topology optimization for crashworthiness
- Simplified modelling of vehicle frontal crashworthiness using a modal approach
- Anisotropic damage for crashworthiness of vehicles
- Car frontal collisions: occupant compartment forces, interface forces and stiffnesses
Issue 2
- Structural adaptivity for acceleration level reduction in passenger car frontal collisions
- Development of JAMA—JARI pedestrian headform impactor in compliance with ISO and IHRA standards
- Joining of aluminium using self-piercing riveting: Testing, modelling and analysis
- Quasi-static crushing of S-shaped aluminum front rail
- Head–neck finite element model of the crash test dummy THOR
- Contribution to the definition of a partial overlapping plastic strain rates domain for moderate loadings – application to tensile testing on metallic materials
- Quasi-static and dynamic axial crushing of thin-walled circular stainless steel, mild steel and aluminium alloy tubes
- Confidence limits for impact speed estimation from pedestrian projection distance
Issue 1
- Factor causing scatter in dynamic certification test results for compliance with EEVC WG17 legform impactor standard
- Injury tolerances for oblique impact helmet testing
- Design optimization of metallic hexagonal cross sections
- Finite element modeling of the crash performance of roadside barriers
- Predicting impact loads of a car crashing into a concrete roadside safety barrier
- Friction modelling between solid elements
- Experimental observations on the crush characteristics of AA6061 T4 and T6 structural square tubes with and without circular discontinuities
- Dynamic response of the pelvis under side impact load – a three-dimensional finite element approach
- Evaluation of impact severity measures for AIS 1 neck injuries in frontal impacts using crash recorder data
2003
Issue 6
- Radioss finite element model of the Thor dummy
- Tests and simulation of a w-beam rail-to-post connection
- Static and dynamic behaviour of a polypropylene for bumpers
- Crashworthiness of helicopters on water: Test and simulation of a full-scale WG30 impacting on water
- Occupant analysis and seat design to reduce neck injury from rear end impact
- Numerical modelling of the axial plastic collapse of externally grooved steel thinwalled tubes
- Velocity changes, mean accelerations and displacements of some car types in frontal collisions
- Human head tolerance limits to specific injury mechanisms
- Influence of crash severity and contact surfaces characteristics on the dynamic behavior of forward facing child occupants
- Impact response of Hybrid III dummy and cadaver knee-femur-pelvis complex
Issue 5
- FE investigation of a spirally slotted tube under axially compressive static and dynamic impact loading
- Crash simulation with glassy polymers – constitutive model and application
- ISOFIX – possibilities and problems of a new concept for child restraint systems
- Aluminium and magnesium castings – experimental work and numerical analyses
- Energy absorbing characteristics of circular frustra
- Empty and foam-filled circular aluminium tubes subjected to axial and oblique quasistatic loading
- Lower extremity injuries in side-impact vehicle crashes
- Experimental investigation on the crushing properties of carbon fibre braided composite tubes
Issue 4
- N-point linear interpolation of motor vehicle crush profiles applied to various force-shortening models
- An investigation into the crashworthiness characteristics of steering wheel armatures from common compact passenger cars
- Validated multibody model for train crash analysis
- The creation of three-dimensional finite element models for simulating head impact biomechanics
- A comparative study on vehicle aluminum and steel hood assemblies
- Real world car crash investigations – A new approach
- The kicking machine: A device for impact testing of structural components
- Three dimensional analysis of multidirectional composites subjected to low velocity impact
- A modern aerospace modeling approach for evaluation of aircraft fuselage crashworthiness
Issue 3
- Energy absorbing stand-up roadside signposts
- Prediction of crushing behaviour of honeycomb structures
- A comparison of the crashworthiness performance of geometrically identical aluminium and magnesium steering wheel armatures
- Static and dynamic axial collapse of fibreglass composite thin-walled tubes: finite element modelling of the crush zone
- Evaluation of the effectiveness of a bus and coach seat during rear end impact by means of sled tests
- Analysis of collision between pedestrian and small car
- Injuries to children in child restraints
- Mathematical modelling of lower leg responses in offset crashes
- Investigation of impact and damage tolerance in advanced aerospace composite structures
- A cost effective far side crash simulation
Issue 2
- Improving occupant safety in coach rollover
- Proposal for a dynamic rollover protective system test
- Australian research to develop a vehicle compatibility test
- Development of structural crashworthiness to the European side impact test in Ford AUII Falcon
- Swedish vision zero experience
- Evaluation of a new visco-elastic foam for automotive applications
- New injury reference values determined for TRL legform impactor from accident reconstruction test
- Finite element analysis of impacts on water and its application to helicopter water landing and occupant safety
- Development of a third generation mechanically inflated airbag head restraint system and its characterisation under impact loading
Issue 1
- Global NCAP harmonisation - initial position, requirements and prospects
- Reconstruction of occupant kinematics and kinetics for real world accidents
- Topology optimization for crashworthiness of frame structures
- Towards a finite element head model used as a head injury predictive tool
- FE simulation of head-on and side impact crash analysis between a nose cone type structure and rigid objects
- An advanced methodology for estimating vehicle rollover propensity
- Contact and impact models for vehicle crashworthiness simulation
- Axisymmetric progressive crushing of circular tubes
- Measuring rollover roof strength for occupant protection
- Carbon skinned aluminium foam nose cones for high performance circuit vehicles
2002
Issue 4
- Crashworthiness analysis of a lock gate impacted by two different river ships
- Optimization of Vehicle Crash Pulses in Relative Displacement Domain
- Assessment of multi-physics FE methods for bird strike modelling-Application to a metallic riveted airframe
- Study of die cast magnesium components for crash safety
- Possibilities and limitation for protective measures for injury reduction Of vulnerable road users
- Design and validation of a new omnidirectional dummy neck For low speed impacts
- Impact testing in Formula One
- Rollover crash tests
Issue 3
- Comparative evaluation of the THOR advanced frontal crash test dummy
- Knee ligament failure under dynamic loadings
- Finite element modelling and simulation of upper limb with radioss
- Pedestrian forward projection impact
- Impact model development for the reconstruction of current motorcycle accidents
- A new concept for a helicopter sub-floor structure crashworthy in impacts on water and rigid surfaces
- Optimal design of train structures for crashworthiness using a multiload approach
- Quasi-static response of laterally simple compressed hexagonal rings
Issue 2
- An experimental air bag test system for the study of air bag deployment Loads
- Full face protective helmet modelling and coupling with a Human head model
- A method to determine structural sensitivities in vehicle crashworthiness design
- Energy absorption of braided composite tubes
- Development and validation of the FAT finite element model for the side impact dummy „EUROSID-1”
- Computer modelling of trans-shoulder forces in motor vehicle accidents
Issue 1
- A multibody methodology for the design of anti-climber devices for train crashworthiness simulation
- Crushing properties of pultruded glass reinforced square tubes
- Computer modelling of trans-shoulder forces in motor vehicle Accidents
- Usage of recycled plastic bottles in roadside safety devices
- Analysis of impact on soft soil and its application to aircraft crashworthiness
- Folding-crumpling of thin-walled aluminium frusta
- Car to car interaction in frontal collisions: A model for the behaviour of the car population and options for improved crashworthiness
- An investigation into the energy absorption characteristics of a four-spoke steering wheel armature subjected to impact loading
2001
Issue 4
- Non-linear numerical modelling of aircraft impact
- Finite element buckling analysis of laminated composite stiffened shells
- Full-scale crash test and simulation of a composite helicopter
- Some effects of Australian Design Rule (ADR) 69 on frontal crash outcomes
- Finite element modelling of anthropomorphic test devices for vehicle crashworthiness evaluation
- Structural Dynamic Responses with Generalised Explicit Finite Difference Models
- Crash strength and energy management of axially loaded extruded aluminium components reinforced with epoxy-based Terocore Foam
- Modelling of glass reinforced thermoplastic composite side-impact structures
- Inertia effects on some crashworthiness parameters for cylindrical shells under axial impact
- Biomechanical simulation of whiplash - some implications for seat design
- Determination of head/neck loads during manoeuvring acceleration
- Influence of deceleration profiles on occupant velocity differential and injury potential
Issue 3
- New dummy head prototype : development, validation and injury criteria
- Gender-Related Spinal Injury Assessment Considerations in Military Aviation Occupant Protection Modelling
- The thoracic member under side impact: an Experimental Approach
- Optimal control of helicopter seat cushions for the reduction of spinal injuries
- Behaviour of frontal protection system in passenger vehicles
- Automatic time stepping algorithms for implicit numerical simulations of blade/casing interactions
- Axial crushing of hybrid square sandwich composite vehicle hollow bodyshells with reinforced core: Experimental
- Advantages of safety belts in heavy trucks - Results of real life crash analyses and of a crash test with a Mercedes-Benz ACTROS 1853
- Crashworthiness Evaluation Using Integrated Vehicle and Occupant Finite Element Models
- Finite Element Simulation of Energy Absorption Devices under Axial Static Compressive and Impact Loading
- Simulation of helicopter under-floor structure impact on water
Issue 2
- Effectiveness of cargo barriers to protect front seat occupants in rear impacts - crash test evaluation
- Finite element simulation of the axial collapse of thin-wall square frusta
- Application of plastic collapse mechanisms for the axial crushing analysis of tubular steel structures filled with aluminium foam
- Design of aluminium foam-filled crash boxes of square and circular cross-sections
- Analysis of crash response of aluminium foam-filled front side rail of a passenger car
- Augmented Lagrangian procedure for implicit computation of contact-impact between deformable bodies
- Optimisation for minimum weight of foam-filled tubes under large twisting rotation
- A Review of the effectiveness of seat belt systems: design and safety considerations
- A two-dimensional analysis of the biomechanics of frontal and occipital head impact injuries
- Prediction of head and neck injury in transport aircraft seats as a function of occupant size and seat configuration
Issue 1
- Dynamic material properties and inelastic failure in structural crashworthiness
- The effect of impact velocity and steering wheel orientation on the crashworthiness of a steering wheel armature
- Sign support height analysis using finite element simulation
- Detailed simulation of the Airbag Inflation Process Using a Coupled CFD/FE Method
- A new oblique impact test for motorcycle helmets
- Kinematic Contact-Impact Algorithm with Friction
- Elasto-plastic response of a free-free beam subjected to pulse loads at any cross-section
- Evaluation of passenger rail vehicle crashworthiness
- Impact Testing and Simulation of a Crashworthy Composite Fuselage Concept
- Finite element simulation of biomechanical response of the human body subjected to lateral impact
2000
Issue 4
- Biaxial bending collapse of thin-walled beams filled partially or fully with aluminium foam
- A demonstrator bumper system based on aluminium foam filled crash boxes
- A hybrid model for pedestrian impact and projection
- A study on a retrofit of the breakaway cable terminal
- Mathematical models integral rating
- Kalman filter estimates of chest velocity
- Experimental study of crush behaviour of sheet aluminium foam-filled sections
- Characteristics and potential applications of a novel shock absorbing elastomeric composite for enhanced crashworthiness
- Investigations on impact testing of head injury protection helmets
Issue 3
- Structural Stiffness, Elastic Recovery, and Occupant Inertial Effects on Measured Door Response in a Laterally Struck Vehicle
- Finite element modelling of skull fractures caused by direct impact
- Development of a finite element model of the human neck subjected to high g-level lateral deceleration
- Analysis and Design Consideration of an Energy Absorbing Steering System Using Orthogonal Arrays
- Interplay of factors influencing collapse modes in axially crushed tubes
- Two-Dimensional Collisions of Vehicles (Case of Consideration of Tire Forces During Impact)
- Axial collapse of hybrid square sandwich composite tubular components with corrugated core: Experimental
- Analysis of polyester and epoxy composite shells subjected to axial crushing
Issue 2
- Biofidelity Evaluation of Dynamic and Static Response Characteristics of the Thor Lx Dummy Lower Extremity
- Designing for the critical impact point on a new bullnose guardrail system
- Validated crash simulation of the most common guardrail system in the USA
- Smart frictional impact energy absorber
- Efficient implicit schemes for the treatment of the contact between deformable bodies: Application to shock-absorber devices
- The bending of fibre-reinforced composite thin-walled tubular components: Numerical modelling
- Recycled paper-rolled tubes as potential energy absorbing elements
Issue 1
- Simple and effective lumped mass models for determining kinetics and dynamics of car-to-car crashes
- Development of a Detailed Vehicle Finite Element Model Part I: Methodology
- Development of a Detailed Vehicle Finite Element Model Part II: Material Characterization and Component Testing
- Airframe Water Impact Analysis
- Failure analysis of multiple delaminated composite plates due to low velocity impact
- Investigation on the Crash Behaviour of Knitted Glass Fibre Reinforced Poly(ethylene-terephthalate) Structures
- Lateral compression of empty and filled single tubes by short width indenters
- Developments in the simulation of real world car to pedestrian accidents using a pedestrian humanoid finite element model
1999
Issue 4
- Some Phenomena in the structural crashworthiness field
- Determination of the Energy Absorption of Cylindrical Shells under Axial Loading by Analysis of the Dynamic Buckling and Folding Process
- Experimental and analytical investigations on the energy absorption by tapering
- Study of axisymmetric crushing mechanisms by sequential limit analysis
- Development and validation of high fidelity vehicle crash simulation models
- Three-dimensional finite element modelling of vehicle crashes against roadside safety barriers
- Train crashworthiness and its impact on society
- Application of Computer-Aided analysis tools for aircraft occupant and seat crashworthiness problems
Issue 3
- Development of a side facing seat and seat belt system for the Australian Army Perentie 4×4
- Pedestrian impact and run over using a multibody simulation tool
- Efficient implicit schemes for the treatment of the contact between deformable bodies: Application to shock-absorber devices
- Performance validation of two finite element models Of a side impact dummy
- Mechanisms of Ankle and Hind-foot Injuries to Drivers and Passengers in Frontal Crashes as Deduced from Field Studies
- Effects of temperature on the crash behaviour of glass fibre reinforced polyamide 12
Issue 2
- High-speed passenger train crashworthiness and occupant survivability
- Modifications to Existing Rolling Stock to Improve Crashworthiness
- The prediction of frontal impact crashworthiness of a spaceframe sportscar
- Analysis of pedestrian head impacts to the bonnets of European vehicles
- The concept of double-walled sandwich columns for energy absorption
- Energy absorption of riveted structures
- Composite vehicle structural crashworthiness - A status of design methodology and numerical simulation techniques
Issue 1
- Analysis and evaluation of a redesigned 3″ ×3″ slipbase sign support system using finite element simulations
- Multibody modelling of a side impact test apparatus
- Finite element modelling of the human body in vehicle side impact
- Vehicle structural impact and occupant biomechanics in a multibody integrated environment
- A Study of Standards for Child Restraint System Sled Tests
- A feasibility study for an optimising algorithm to guide car structure design under side impact loading
- Finite element modelling of fracture in long bones
1998
Issue 4
- Mechanisms of cervical spine fractures and soft tissue injuries of motorcyclists for the assessment of the effectiveness of back protectors
- Frontal impacts with small partial overlap: real life data from crash recorders
- The simulation of real world car to pedestrian accidents using a pedestrian humanoid finite element model
- The response of square cross-section tubes under lateral impact loading
- Finite element transient dynamic analysis of laminated composite Pretwisted rotating plates subjected to impact
- Kinematics of SID on side-facing aircraft seat
Issue 3
- A study on crushing characteristics of thick-walled aluminum tubes under axial loading
- Analysis of airbag depowering and related parameters in out of position environment
- Validation of an Analytical Model of a Right-Angle Collision between a Vehicle and a Fixed, Rigid Object
- Collapse of thin-walled empty and filled square tubes under lateral loading between rigid plates
- Serious neck injury in rollovers - is roof crush a factor?
- Static and dynamic bending strength of the leg
- International Crashworthiness Conference – IJCRASH'98
Issue 2
- Side Impact Protection - Occupants in the Far-Side Seat
- Compatibility analysis of Mini cars in frontal collisions using MADYMO
- Tracking the energy in an energy absorbing guardrail terminal
- Injury mechanisms and criteria for the human foot and ankle under axial impacts to the foot
- Thermal influence on mild steel behaviour during a crash event
- An investigation on the impact performance of pipelines
Issue 1
- The Influence of Frontal Crash Test Speeds on the Compatibility of Passenger Cars in Real World Accidents
- Promoting safety using retrospective large databases
- Estimating crash performance for new car design
- Vehicle safety in Australia using real world crash data
- Benefit of in depth data for analysing injury mechanisms of accidents with bicyclists and motorcyclists
- Reconstructing crashes involving emergency braking on wet roads
- Taxonomy of heavy vehicle accidents
1997
Issue 4
- Effect of an Ultralight Metal Filler on the Torsional Crushing Behaviour of Thin-Walled Prismatic Columns
- The use of finite element analysis in roadside hardware design
- Plastic collapse of metallic conical frusta of large semi-apical angles
- Paediatric Neck Modelling using Finite Element Analysis
Issue 3
- Editorial: Regulations Vs. Crash Test Vehicle Rating Systems
- Finite element model and validation of a surrogate crash test vehicle for impacts with roadside objects
- Mathematical simulation of knee responses associated with leg fracture in car-pedestrian accidents
- A study on large deflection of thin-walled tubes under pure bending
- Automobile side impact modelling using ATB software
Issue 2
- Improving bus rollover design through modal analysis
- The Development of a ‘Smart Seat’ Occupant Size and Position Sensing System for the Enhancement of Occupant Protection
- Mechanics of a mechanically triggered airbag head restraint system for occupant protection in rear end impact
- Brain kinematics in physical model tests with translational and rotational acceleration
- Biomechanics of cervical spinal cord injury in flexion and extension: A physical model to estimate spinal cord deformations
- Impact biomechanics of the human thorax-abdomen complex
Issue 1
- Response of helmets in direct and oblique impacts
- Numerical simulation of the Lynx helicopter main lift-frame component collapse
- Aviation safety and crashworthy seat design
- Evaluation and design of vehicle structures for crash protection - a systems approach
- A multibody approach to the vehicle and occupant integrated simulation
- FASIM_C++ - A versatile developing environment for vehicle dynamics simulation
- Vehicle Frontal Crashworthiness Analysis by Simplified Structure Modeling using Nonlinear Spring and Beam Elements
- Thoracic response and injury with belt, driver side airbag, and force limited belt restraint systems
1996
Issue 4
- Evaluation of parameters affecting simulation of airbag deployment and interaction with occupants
- Analysis of energy-absorbing seat configurations for aircraft
- Optimal design of composite fuselage frames for crashworthiness
- MADYMO models of the human and dummy lower limbs to investigate biomechanical responses
- Development of the Heathrow Express crashworthy rail vehicle
- Simulation of brain kinematics in closed head impact
Issue 3
- Finite element impact response analysis of doubly curved composite sandwich shells Part-II : numerical results
- Parameter estimation for head impacts and brain injury in crash reconstruction
- Energy absorption for a truck-front bumper bar
- A study on crushing behaviour and energy absorption capacity of a thin-walled rectangular tube under axial compression
- An investigation of fracture mechanisms of carbon epoxy laminates subjected to impact and compression-after-impact loading
- Computer simulation of impact damage on thin-skinned carbon fibre composite panels
- The effect of multiple impact damage on the residual compressive strength of composite structures
- Side impact protection: the use of 3-D reinforced composite panels
Issue 2
- Development of energy absorbing devices using a kinetostatic multibody dynamics methodology
- A side airbag system to meet chest injury measures: evaluation by mathematical simulations
- Predicting the crashworthiness of vehicle structures made by lightweight design materials and innovative joining methods
- An evaluation of deformation based Chest Injury Criteria using a hybrid III finite element model
- Finite element impact response analysis of doubly curved composite sandwich shells Part-I: theoretical formulation
- Calculation of the dynamic axial crushing response of complex prismatic sections
- Non-destructive crash testing
Issue 1
- Introduction to crashworthiness
- Modelling verification of an airframe section and comparisons with impact test
- Structural crashworthiness simulation of a rear end collision of a small European car
- A mathematical model of the BIOSID dummy
- Modelling of occupant biomechanics with emphasis on the analysis of lower extremity injuries
- Lessons learned in modeling a moving deformable barrier (MDB) impacting a rigid wall
- Strain rate and inertial effects in free external inversion of tubes
- Non-destructive crash testing